Oil separator SLIDE II ORANGE

Description

The oil treatment plant SLIDE II ORANGE is a light liquid separation system for rainwater from paved surfaces such as squares, parks, underground garages, etc.
The separators SLIDE II ORANGE line is designed for a flow rate between 3 and 10 l/s.

The static oils and light liquids separator SLIDE II ORANGE is realized in a polyethylene ribbed tank with rectangular base developed in plant rather than in section, with a maximum height of 120 cm. Recommended for difficult installations in depth for example due to the presence of ground water or excavation in bedrock. The particular rib ensures installation without concrete abutment also with groundwater.

TOP

Features

The separator SLIDE II ORANGE treats rainwater run-off from paved surfaces.

It aims to remove not emulsified mineral oils and fuels such as gasoline and diesel.

The SLIDE II ORANGE is realized in a polyethylene (PE) ribbed tank with a rectangular base.

The separator removes oils and light liquids by means of natural gravity flotation and oil drops, lighter than water, raise to the water surface.

In order to prevent that the rising of aggregate droplets disturb the coalescence processes the direction of the filters and the flow are the same.

On the bottom, escaped sediments are accumulated from the sands trap, eventually installed upstream.

Light liquids are accumulated on the free surface. The required oil storage volume is valued according to the provisions of EN 858-1.

To guarantee the quality of the effluent, the system is equipped with a baffle to prevent the dragging of the oil accumulated. The water is drawn under the water surface.

The system must be equipped with an emergency by-pass device upstream of the separator (available on request) necessary to remove the exceeding design flow rates.

Domestic wastewater with organic or gray water pollutants are not allowed to be discharge into, only run-off rainwater.

The oil separator can be part of a rainwater treatment plant for runoff paved surfaces (waste storage, service stations, storage materials and machine parts, garages, auto wreckers) or industrial waste such as car washes.

The separator SLIDE II ORANGE treats rainwater run-off from paved surfaces.
It aims to remove not emulsified mineral oils and fuels such as gasoline and diesel.
The SLIDE II ORANGE is realized in a polyethylene (PE) ribbed tank with a rectangular base.
The separator removes oils and light liquids by means of natural gravity flotation and oil drops, lighter than water, raise to the water surface.
In order to prevent that the rising of aggregate droplets disturb the coalescence processes the direction of the filters and the flow are the same.
On the bottom, escaped sediments are accumulated from the sands trap, eventually installed upstream.
Light liquids are accumulated on the free surface. The required oil storage volume is valued according to the provisions of EN 858-1.
To guarantee the quality of the effluent, the system is equipped with a baffle to prevent the dragging of the oil accumulated. The water is drawn under the water surface.
The system must be equipped with an emergency by-pass device upstream of the separator (available on request) necessary to remove the exceeding design flow rates.
Domestic wastewater with organic or gray water pollutants are not allowed to be discharge into, only run-off rainwater.
The oil separator can be part of a rainwater treatment plant for runoff paved surfaces (waste storage, service stations, storage materials and machine parts, garages, auto wreckers) or industrial waste such as car washes.
The SLIDE II ORANGE follows a sand trap (or sludge trap) defined for any specific cases by the EN 858-2.The SLIDE II ORANGE follows a sand trap (or sludge trap) defined for any specific cases by the EN 858-2.

TOP

Technical Specifications

The oil water separator SLIDE II ORANGE is made of a polyethylene tank with specific ribs to the underground installation appropriate to withstand stresses of the soil and the ground water without the need for an abutment in concrete. The parameter that identifies separators is the nominal size (NS) which corresponds to the maximum flow that can be treated under standard conditions defined by the EN 858-1. The range SLIDE II ORANGE is available with nominal flow models from 3 to 10; with a volume ranging from 1000 to 3000 liters.
The separator is provided with 1 or 2 (depending on model) manhole DN 600 mm for cleaning and maintenance.

The SLIDE II ORANGE is tested to be installed at a depth of up to 600 or 1200 mm (between the ground level and the top of the tank) depending on the version; in this case the article has to be equipped with the appropriate extension (available as an accessory).
The separator series SLIDE II ORANGE is designed with reference to DIN 1999 Part 1 and Part 2 with with a specific hydraulic residence time.

Gross dimension are shown in table as follow.

NSDNBLHH1H2
Name[-][mm][cm][cm][cm][cm][cm]
DEO ORANGE 331001151151159590
DEO ORANGE 661251352401109489
DEO ORANGE 1010160140240132106.5101.5

NOTE: sizes can be changed without notice.
The letters in figures and table have the meanings set out below:
NS – nominal size according to EN 858-1/2
DN – nominal diameter inlet and outlet pipes
B – total external width
L – total external length
H – total external height (without cover)
H1 – inlet pipe height
H2 – outlet pipe height

For the installation you need to follow the procedure steps: ORANGE line underground installation mode.

Higher flow rates are available in SLIDE II BLACK separators.

Oil separator with coalescence filter, tested according to EN 858-1, EN 858-2 and CE marked, are available in SEPKO line.

For solutions with sludge trap upstream the liquid light separation zone go to section: Constant Flow Rate (CFR), for example SEPKO ST.

For further information and tailor made solutions, please contact technical office.

TOP

Diagram Drawing

TOP

Guarantees

The SLIDE II ORANGE is designed with reference to European standards and to DIN 1999 Part 1 and Part 2.

AZU Water is available to develop solutions tailored to the particular needs of the customer.

TOP